Recommended dye combinations for multiplex qPCR

Multiplex qPCR requires careful design for optimal results. Choosing the correct dye combinations will enhance the specificity and minimize the background for your assay. Use the IDT PrimeTime™ Multiplex Dye Selection Tool and the following recommendations to find the best dye combination for your assay.

The experimental design for multiplex quantitative PCR (qPCR) is more complicated than for single reactions. The probes used to detect individual targets must contain unique reporter dyes with distinct spectra. The settings for excitation and emission filters of real-time detection systems vary from manufacturer to manufacturer; therefore, instruments must be calibrated for each dye as part of the experiment optimization process. Ensuring that instruments are appropriately calibrated will enhance dye specificity and minimize background and overlap of fluorescent signals.

When selecting dyes:

  • Choose dyes that are compatible with your instrument. The instrument must be capable of detecting the emission spectrum for each dye you are using. The PrimeTime Multiplex Dye Selection Tool from IDT includes dye compatibility for over 35 different instrument models. After selecting your qPCR instrument from the dropdown menu and selecting the number of assays you are multiplexing, the recommended and alternative dyes are populated. The first column lists the recommended dyes for the instrument (Figure 1, blue boxed content).  
  • Choose dyes that can be calibrated on your instrument. Your real-time qPCR instrument must be calibrated for the set of dyes you choose. If it is not, you must calibrate the instrument or select different dyes. The second column in the Multiplex Dye Selection Tool offers a list of alternative dyes that are compatible but require instrument calibration (Figure 1, orange boxed content).
  • Avoid overlap of emission spectra. Choose dyes with appropriate excitation wavelengths and little to no overlap in their emission spectra. Consider total fluorescence intensity as well. For example, FAM is a good dye choice to detect low-copy transcripts because it has high fluorescent signal intensity. For high-copy transcript (e.g., housekeeping genes), use fluorophores with lower signal intensities. Make sure to avoid any dyes that have overlapping spectra with ROX, if your instrument uses this as a passive reference dye.
Multiplex qPCR dye selection tool for qPCR instruments

Figure 1. PrimeTime™ Multiplex Dye Selection Tool. This tool provides recommendations for the best dyes to use in multiplex reactions based on your specific qPCR instrument. The tool also lists possible alternative dyes, which may require instrument calibration.

Minimize signal cross-talk by using probes with low background fluorescence. Highly efficient dark quenchers, especially those used in combination with a secondary internal  ZEN™ or TAO™ internal quencher (Table 1), reduce background fluorescence considerably. Double-quenched probes provide increased sensitivity and clear end-point signal, as well as earlier Cq values (see the DECODED™ article, Decrease qPCR Background, Improve qPCR Signal). This is particularly useful for multiplex reactions, since having several fluorophores in the same tube causes higher background fluorescence. We recommend using the same “quencher type” (all dark quenchers or all fluorescent quenchers) in assays that will be multiplexed.

Table 1. Suggested quenchers for common fluorophores used in multiplex qPCR.
Fluorescent dye(s) Excitation
wavelength (nm)
Emission
wavelength (nm)
Dark
quencher(nm)
FAM 495 520 ZEN/Iowa Black™ FQ
SUN™ 538 554 ZEN/Iowa Black FQ
HEX 538 555 ZEN/Iowa Black FQ
Cy® 3 550 564 Iowa Black RQ
Texas Red® -X 598 617 Iowa Black RQ
Cy® 5 648 668 TAO/Iowa Black RQ
Yakima Yellow is a registered trademark of ELITech Group. Cy dyes are a registered trademark of Cytiva. Texas Red is licensed from Molecular Probes, Inc (a wholly-owned subsidiary of LifeTechnologies Corporation). JOE is a registered trademark of ThermoFisher. AriaMX is a registered trademark of Agilent Technologies, Inc. Iowa Black, SUN, ZEN, and TAO are trademarks of IDT.

Published Jun 18, 2020
Revised/updated Jun 12, 2020